FOOT OPERATED PUMPS

The 60R/65R Series foot operated hydraulic pumps extend the range of operation for those applications where a hand pump is not ergonomic or practical. Any of the single stage pump 1/2" bore and greater or two-stage pump configurations can be incorporated into the foot pump and where necessary a reservoir can be included to complete the package. As standard the foot-operated pump utilizes one pedal to pump and a separate pedal to release pressure. A relief valve is also standard for foot-operated pumps. Displacements are the same as hand operated pumps, pedal forces and maximum rated pressures are shown below.

STANDARD FEATURES

• All steel construction for rugged use.
• Rod wiper (except 1-1/2" bore) to exclude dirt.
• All o-ring seals – no fiber or metal seals to leak.
• Self-retained release screw, which cannot be accidentally removed.
• Capable of operating in any mounting orientation.
• Heat treated pins and linkages for extended life.
• Ground pistons to prevent seal extrusion.
• Nitrotec treated pistons for corrosion resistance.

OPTIONAL FEATURES

• Optional seals for pumping alternate fluids.
• Manifold mounting for inlet and/or outlet.
• Operating handle length – 18 or 36 inches for various handle forces.
• Custom designs for your particular application requirements.

FOOT OPERATED ORDERING INFO

Standard sizes are 030 for 3/8, 040 for 1/2", 050 for 5/8", 060 for 3/4", 080 for 1", 120 for 1- 1/2", 124 –125-126 are for two stage configurations. Any two size pumps can be combined, maximum pressure rating is a function of the final configuration, consult engineering for rating. When operated together the displacements and handle forces are cumulative, add for total displacement and force.

Standard configuration is for a common inlet and common outlet, if required a common inlet with separate outlets is available – consult factory.

500 Series dimensional data is available in the 500 Series Catalog.

• Model 60R-040
  Maximum Rated Pressure: 

  5,000

  
  

  Piston Diameter: 

  1/2

  
  

  Pedal Force per 100 PSI: 

  2.8

  
  

  Weight: 

  16
• Model 60R-050
  Maximum Rated Pressure: 

  2,500

  
  

  Piston Diameter: 

  5/8

  
  

  Pedal Force per 100 PSI: 

  4.4

  
  

  Weight: 

  16
• Model 60R-060
  Maximum Rated Pressure: 

  1,750

  
  

  Piston Diameter: 

  3/4

  
  

  Pedal Force per 100 PSI: 

  6.4

  
  

  Weight: 

  16
• Model 60R-080
  Maximum Rated Pressure: 

  1,000

  
  

  Piston Diameter: 

  1

  
  

  Pedal Force per 100 PSI: 

  11.4

  
  

  Weight: 

  16
• Model 60R-120
  Maximum Rated Pressure: 

  500

  
  

  Piston Diameter: 

  1-1/2

  
  

  Pedal Force per 100 PSI: 

  25.6

  
  

  Weight: 

  17
• Model 65R-124
  Maximum Rated Pressure: 

  5,000

  
  

  Piston Diameter: 

  1-1/2 x 1/2

  
  

  Pedal Force per 100 PSI: 

  25.6 x 2.8

  
  

  Weight: 

  17
• Model 65R-125
  Maximum Rated Pressure: 

  2,500

  
  

  Piston Diameter: 

  1-1/2 x 5/8

  
  

  Pedal Force per 100 PSI: 

  25.6 x 4.4

  
  

  Weight: 

  17
• Model 65R-126
  Maximum Rated Pressure: 

  1,750

  
  

  Piston Diameter: 

  1-1/2 x 3/4

  
  

  Pedal Force per 100 PSI: 

  25.6 x 11.4

  
  

  Weight: 

  17

- WARNING -

NO internal relief valve is supplied with these pumps unless ordered as an OPTION. Therefore, for safety purposes, it is necessary to plumb a relief valve, on the outlet of these pumps, which is appropriately set below the lowest maximum rating of any system component.

500 Series dimensional data is available in the 500 Series Catalog.